In my race to ship all the back orders of hoops out in May, I did not have time to print handling instructions. These are posted on the product page: http://bettyhoops.com/orderform.html.

I will start adding these in each hoop package and am sorry for any inconveniences.

I will also post a video on how to connect as viewing will totally make more sense.

HOW TO CONNECT:

1.) there is a male & a female end on each segment.

2.) the male end has the button that needs to be pushed as you slide it into the female end.(make sure you line the ridges on one end, up with the track on the other.)

3.) When you hear a snap, that means the button has engaged inside & is connected.

HOW TO DETACH

1.) press firmly on the OM symbol. (this pushes on the button which is inside to release it from the hole it is resting in) you want to feel the button be pressed all the way down so that it is flush with the pipe. Once you feel this, just slide both ends apart.

2.) The majority of people make the same mistake. They twist the ends. This does nothing. Just push really hard on the button & keep firm pressure as you slide both ends apart.

This entry was posted on Saturday, July 3rd, 2010 at 2:48 pm and is filed under Hoop News. You can follow any responses to this entry through the RSS 2.0 feed. You can leave a response, or trackback from your own site.